Mould rack mainly stores all kinds of mould items, according to the layer loading capacity requirements into light mould shelves and heavy mould shelves.
Mould stand is mainly used for placing all kinds of plastic moulds, metal moulds, die casting moulds, powder metallurgy moulds and extrusion moulds.
The top of the shelf can be configured with a mobile hoist car to facilitate the lifting of the mold. The top of the shelf can be configured with a mobile hoist car, to facilitate the lifting of the mold.
Safe and reliable additional safety device;
Easy to operate using bearing combination, sliding balance and attached with independent die lifting device;
Save the site, covers an area of 1.8 square meters, can store dozens of sets of small and medium molds;
Simple structure, assembled by a variety of components, easy to disassemble, transport and assembly;
Drawer type die frame each compartment each layer bearing 800-1000KG; Save space, each box can be put multiple sets of mold, convenient mold maintenance management and search;
The drawing plate of the mold frame can be easily pumped after bearing, and the upper and lower intervals can be adjusted freely, so that the access work can be accomplished easily and quickly by cooperating with the block and manual hoist.
The mold frame adopts removable structure, all accessories can be arbitrarily combined, up and down spacing, easy to disassemble and assemble.
Shelf features:
Combined assembly, mainly by the column, guide groove, drawer layer, tie rod, positioning pin, etc., bolted connection, stable structure, safe and reliable, row use.
Drawer tray mainly consists of slide rail, drawer tray. The drawer tray is composed of a frame and a steel plate welded with a torque tube and a bending piece.
Due to the safety consideration, the positioning pin and limit pin are designed to ensure the safety of drawer tray when drawing out.
Lightweight mold shelf layers are loaded at 200 to 800kg/ layer. Heavy drawer type shelving in: 800 to 1500kg/ layer.
The mold shelf occupies a small area, the layer is large, the classification is detailed, the operation is simple.
The mold shelf can also be used as a drawer tray on the beam of the cargo space shelf, which is cost saving and has a more stable structure.
High strength steel as the column, high strength industrial bearings made of the track to ensure that the maximum load of 2 tons can be freely pulled
The interlocking device ensures that only one layer of support plate can be extracted at a time to avoid weightlessness and make it more safe and reliable.
Full load bidirectional structure die holder
Locking device, only when the handle is pressed to open the tray, to ensure safety
Double structure heavy mold shelf bearing capacity: 2000KG per layer